Upgrading everyday security Commpact Manuale Utente Pagina 24

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 58
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 23
Table 41. Teaming Policy table (Continued)
Teaming Mode
Multiple VTEPs
Created vDS Version
LACPv2 No 5.5
Source MAC (MAC Hash) Yes 5.5
NOTE LBT mode is not supported.
Logical Distributed Routers have the following teaming policy restrictions:
n
Source MAC and Source Port teaming policy will work with one VTEP and one active uplink. You can
have multiple uplinks with fail-over policy where the other uplinks are in standby state.
Plain VXLAN switching (without Logical Distributed Router) will work with multiple VTEPs and
multiple uplinks.
n
Static Lag and LACP is supported with one VTEP and multiple uplinks.
Working with Transport Zones
A transport zone is the compute diameter defined by a set of vCenter clusters.
Add a Transport Zone
Procedure
1 Log in to the vSphere Web Client.
2 Click Networking & Security and then click Installation.
3 Click Logical Network Preparation and then click Transport Zones.
4 Click the New Transport Zone icon.
5 In the New Transport Zone dialog box, type a name and description for the transport zone.
6 Depending on whether you have a controller node in your environment, or you want to use multicast
addresses, select the control plane mode.
n
Multicast: Multicast IP addresses on physical network is used for the control plane. This mode is
recommended only when you are upgrading from older VXLAN deployments. Requires
PIM/IGMP on physical network.
n
Unicast : The control plane is handled by an NSX controller. All unicast traffic leverages headend
replication. No multicast IP addresses or special network configuration is required.
n
Hybrid : The optimized unicast mode. Offloads local traffic replication to physical network (L2
multicast). This requires IGMP snooping on the first-hop switch, but does not require PIM. First-
hop switch handles traffic replication for the subnet.
7 Select the clusters to be added to the transport zone.
8 Click OK.
NSX Installation and Upgrade Guide
24 VMware, Inc.
Vedere la pagina 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 57 58

Commenti su questo manuale

Nessun commento